Log in
213-650-6222
Slate stone veneer panels give you the look of natural stone on any wall, without the weight or cost of full masonry. This collection has exclusive designs, each cast from real slate for true color and texture. Colors run from soft gray to deep charcoal, so you can match a fireplace, an accent wall, a home exterior, or a commercial space. Every panel is light enough to install over drywall or cement board, which cuts labor time for homeowners and contractors alike. Browse the designs below, order a sample to check the color in your own light, or request trade pricing on a larger order.
Order a slate veneer sample to check color and texture in your space, or request a trade quote for bulk and contractor pricing. Not sure how much you need? Our team can help you calculate square footage—call 213-650-6222.
What Makes These Slate Panels Different
- Real stone surface: Each veneer captures the natural color, texture, and layered character of genuine slate.
- Lightweight construction: The thin panels are easier to handle and install than full masonry, helping reduce labor time.
- Indoor and outdoor use: Selected slate veneers suit fireplaces, accent walls, exterior facades, entry walls, and commercial spaces.
- Built for confidence: Backed by our 10-year limited warranty, with free U.S. shipping on qualifying orders of $1,500 or more.
Where People Use Slate Veneer Panels
- Fireplace surrounds and feature walls
- Living room, bedroom, and hallway accent walls
- Home exteriors, facades, and entry walls
- TV walls, kitchen islands, and custom furniture
- Restaurants, hotels, offices, retail displays, and other commercial spaces
How to Choose the Right Slate
Start with color, location, texture, and coverage. Decide whether you want a soft gray, warm variegated tone, or deep charcoal; confirm whether the product is rated for your indoor or outdoor application; compare texture in the light where it will be installed; and calculate the total square footage plus about 10% for cuts and waste. Order a sample to compare the finish in your space, or contact our trade team for help with larger projects.
Good to Know Before You Buy
Natural stone varies in color and pattern, so blend panels from multiple boxes during installation. Sealing is often unnecessary in dry interior spaces but may be recommended for wet or high-traffic areas. Install only over a clean, dry, properly prepared substrate. For fireplaces and other heat-adjacent applications, follow the appliance manufacturer's clearances and local building requirements. Review the stone veneer data sheet and installation guide before starting.
Slate Stone Veneer Panels: Common Questions
Can slate veneer panels be used outdoors?
Yes. Many designs are rated for both indoor and outdoor use, including facades and entry walls. Confirm the application guidance on the individual product page before ordering.
What surfaces can I install slate veneer over?
Slate veneer can be installed over properly prepared drywall, cement board, and approved exterior substrates. The surface must be clean, dry, stable, and suitable for the selected adhesive. Follow our installation guide.
Do slate veneer panels need to be sealed?
Sealing is often unnecessary in dry interior spaces. Wet, high-traffic, or stain-prone areas may benefit from a compatible sealer. Review the product data sheet and test the sealer on a sample first.
Can I order a slate sample first?
Yes. Order a slate veneer sample to check the color, texture, and natural variation in your own lighting before purchasing full panels.
Do you offer contractor or trade pricing?
Yes. Designers, contractors, builders, and other professionals can request project support and volume pricing through our trade program.
How do I calculate how much slate veneer I need?
Multiply the wall height by its width to calculate square footage, then add about 10% for cuts and waste. For help estimating your project, call 213-650-6222.
Where can I find specifications and installation documents?
Review our stone veneer data sheet and installation guide.